Amalensi e-Plano-concave asebenza kahle uma into nesithombe kuku-absolute conjugate ratios, okukhulu kuno-5:1 noma ngaphansi kuka-1:5. Kulokhu, kungenzeka ukunciphisa ukuphuma okuyindilinga, i-coma, nokuhlanekezela. Ngokufanayo namalensi e-plano-convex, ukuze kuzuzwe ukusebenza kahle okuphezulu indawo egobile kufanele ibhekane nebanga lento enkulu kunazo zonke noma i-conjugate engapheli ukuze kuncishiswe ukuphuma okuyindilinga (ngaphandle uma isetshenziswa ngamalaser anamandla amakhulu lapho lokhu kufanele kubuyiselwe emuva ukuze kuqedwe ukuba nokwenzeka kwe-virtual aberration. gxila).
Ngenxa yokudluliswa kwayo okuphezulu ukusuka ku-0.18 µm kuya ku-8.0 μm, i-CaF2 ibonisa inkomba ephansi ye-refractive ehluka ukusuka ku-1.35 ukuya ku-1.51 futhi ivamise ukusetshenziselwa izinhlelo zokusebenza ezidinga ukudluliswa okuphezulu kububanzi be-infrared ne-ultraviolet spectral, inenkomba ye-refractive engu-1.4028 ku-1.4024 ku-1. . I-calcium fluoride nayo ayisebenzi ngamakhemikhali futhi inikeza ubulukhuni obuphakeme uma iqhathaniswa ne-barium fluoride yayo, kanye nabazala be-magnesium fluoride. I-Paralight Optics inikeza i-Calcium Fluoride (CaF2) amalensi e-plano-concave anama-antireflection ebangeni le-wavelength elingu-2 µm ukuya ku-5 µm elifakwe kuzo zombili izindawo. Lokhu kunamathela kunciphisa kakhulu ukubonakala okungaphezulu kwe-substrate, kuveza ukudluliswa okumaphakathi okungaphezu kuka-97% kulo lonke uhla lwe-AR. Hlola amagrafu alandelayo ukuze uthole izithenjwa zakho.
I-Calcium Fluoride (CaF2)
Engagqotshiwe noma ene-Antireflection Coatings
Itholakala kusuka -18 kuya -50 mm
Ilungele ukusetshenziswa kuzicelo ze-Excimer Laser, ku-Spectroscopy kanye ne-Cooled Thermal Imaging
I-Substrate Material
I-Calcium Fluoride (CaF2)
Uhlobo
Ilensi yePlano-Concave (PCV)
Inkomba ye-Refraction (nd)
1.428 @ Nd:Yag 1.064 μm
Inombolo ye-Abbe (Vd)
95.31
I-Thermal Expansion Coefficient (CTE)
18.85 x 10-6/℃
Ukubekezelela Ububanzi
Ukunemba: +0.00/-0.10mm | Ukunemba okuphezulu: +0.00/-0.03 mm
Ukubekezelela Ukuqina Kwesikhungo
Ukunemba: +/-0.10 mm | Ukunemba okuphezulu: +/-0.03 mm
Ukubekezelela Ubude obugxile
+/- 2%
Ikhwalithi Yobuso (Scratch-Dig)
Isilinganiso: 80-50 | Ukunemba okuphezulu: 60-40
I-Surface Flatness (I-Plano Side)
λ/4
Amandla Obuso Obuyindilinga (Convex Side)
3 l/2
I-Surface Irregularity (Peak to Valley)
λ/2
Isikhungo
I-Precison:<3 arcmin | Ukunemba okuphezulu:< 1 arcmin
Imbobo ecacile
90% we-Diameter
I-AR Coating Range
2 - 5 μm
Ukudluliswa kwe-Coating Range (@ 0° AOI)
I-Tavg > 97%
Ukubukeka phezu kobubanzi bokuhlanganisa (@ 0° AOI)
I-Ravg< 1.25%
Design Wavelength
awu 588nm